|
|
|
|
|
Detailed Information |
Bus Analyzer Software |
RT Production Test Plan
 Test & Simulation Modules for the VXIbus (C-Sized)
- Dual Redundant, Single Stream HS/LS configuration
- Concurrent HS/LS BC, 31 RT's & BM Operation
- Full HS & LS Error Injection/ Detection Capability
- Multi-level HS/LS Trigger for Capture/ Filtering
- IRIG-B Time Decoder for Data Correlation
- Real Time Recording & Physical Bus Replay
- On board Fibre Optic Front End (FOFE)
- Simulator Only version: API3910S
- Monitor Only version: AXI3910M
- Board Support Package: VXI 'plug&play' Driver including Soft Front Panels
- Model AXI3910-XP supports EFEx, 'Mixed Mode & Dual Mode'
- Modification Kit available for EFEx Upgrade to exsisting AXI3910 modules
- Powerful Windows based PBA-3910-XP/ ParaView Databus Analyser/ Visualiser Software option
Detailed Information |
Bus Analyzer Software |
RT Production Test Plan
General Features
The AXI3910-E is part of a new family of VXIbus cards offering full function Test, Simulation, Monitoring and Databus Analyzer functions for STANAG3910 applications including support for the Rafale Aircraft, which uses an Electrical Front End. A Single Stream STANAG3910 High Speed and Low Speed Interface is provided by the AXI3910-E, outlined as a 'C-Sized’ standard module. The AXI3910-E can be used for Protocol Testing and Simulation of LS/HS Bus Controller, Multiple Remote Terminals and Chronological Monitoring at full bus load. All operations are performed concurrently with no degradation of performance in any operational LS/HS mode. As an option the powerful PBA-3910 Databus Analyzer Software for Windows is available for use with the AXI3910-E module, as is the ParaView Software for display of bus parameters in Engineering Units and Graphical Display.
Bus Controller- Autonomous operation including sequencing of LS Minor/Major Frames.
- Programmable HS Transmitter initialise Time & HS Receiver Timeout.
- Full LS/HS Error Injection down to word and bit level.
- Supports Multi-Buffering.
- External trigger input and output.
Multiple Remote Terminal- Programmable RT Response Time down to 4µS for each simulated LS-RT.
- Multi-Buffering for each simulated RT, MID and Sub-Address.
- Full LS/HS Error Injection for each Simulated RT, Sub-Address and MID down to word and bit level.
- Supports Multi-Buffering.
Chronological Bus Monitor- Multi Level Complex Trigger on LS/HS Error, LS/HS Word LS/HS Data Word in Limits.
- Monitor and Capture of LS/HS messages Trigger on Start, Centre and End LS/HS Message Counters.
Physical Bus Replay
The AXI3910-E module can reconstruct previously recorded STANAG3910 Databus traffic to the LS/HS Databus with excellent timing accuracy. Recorded data files can be selected for Physical Bus Replay to perform systems integration and test with the ability to disable any or all RT Reponses from a recorded file.
IRIG-B Time Code Decoder
An on-board IRIG-B time code decoder and generator allows synchronisation of STANAG3910 bus traffic, using single or multiple AXI3910-E modules. Multiple AXI3910-E modules can be synchronised using one common IRIG-B time source or the on-board time code generator of one AXI3910-E module as the reference for accurate correlation of data across multiple STANAG3910 data streams.
Physical Bus Interface
A Physical Bus Interface daughter board (PBI) provides the interface to the dual redundant MIL-STD-1553 bus and the STANAG3910 High Speed Electrical Transceiver.
Driver Software Support
With the AXI3910 module a VISA compatible VXI "plug&play" driver software package is included. Soft Front Panels and Function Panels processed under LabWindows/CVI are also provided.
Detailed Information |
Bus Analyzer Software |
RT Production Test Plan
PBA.pro™ Databus Test and Analysis Software – Get on Board!
PBA.pro™ is a new generation of Avionics Databus Test and Analysis software using a scalable, flexible and integrated framework approach compatible with AIM’s family of “Common Core” and “New Common Core” high performance test & simulation modules for MIL-STD- 1553, STANAG3910/EFEX, ARINC429, AFDX/ ARINC664, Panavia Serial Link and Fibre Channel and other I/O and peripheral inter-connections and hardware.
The PBA.pro™ software runs on both Windows™ and Linux™ platforms and integrates more functions and features ever seen in one software product for Avionics test, development, and simulation and monitoring applications. PBA.pro™ incorporates low level databus analyzer and protocol testing features found in traditional databus analyzer products from AIM (PBA-2000, PBA3910/XP, PAA-429, fdXplorer & fcXplorer) but the new PBA.pro™ facilities, capabilities and concepts are unique to AIM.
PBA.pro™ – Get on Board:- Modular, Scalable and Integrated Software Approach
- Low Level Protocol/ Network Analysers
- Bus/ Network Visualisers
- Recording/ Monitoring/ Data Logging Systems
- Special To Type Test Equipment (STTE)
- Test Benches and Integration Rigs
- “Hardware in the Loop” Simulation Rigs
- Networked Cluster of Test Resources
- PBA.pro supports the usage of foreign character sets (i.e. Japanese, Chinese) under country specific Windows™ Operating System
MIL-STD-1553A/B Databus Analyser Software for Windows- BC, Multi-RT, Monitor, Recording and Physical Bus Replay functions.
- Supports up to 16 MIL-STD-1553A/B bus streams concurrently.
- Quick Status, Real Time Activity and Bus Loading Displays.
- Comprehensive Trigger/ Filtering on selected Bus Traffic.
- Time Correlation with Internal / External IRIG-B Time Code.
- Mixed Protocols Supported: MIL-STD-1553A and MIL-STD-1553B.
- Save/ Load Project Files and Save Restore Display Layout’s.
- Easily Interface Customer Applications via the Remote DLL.
- PBA-2000-NET version for remote Client / Server based operation.
- ScriptX for Automating and speeding Testing (No cost option).
- ParaView option for Engineering Unit & Graphical Parameter Display and Control of MIL-STD-1553/ ARINC429/ AFDX/ARINC-664 and Fibre Channel streams.
PBA 2000 Net- Optional Client/Server based PBA-2000-NET for remote control via a LAN.
Paraview- Optional ParaView Software for Parameter Display, Control and Post Analysis with Engineering Units & Graphical Displays.
Detailed Information |
Bus Analyzer Software |
RT Production Test Plan
 The AIM RT Production Test Plan Software provides fully interactive and automated test facility for users requiring to run the AS4112 RT Production Test Plan Software (Protocol Only) on their MIL-STD-1553B and EFAbus Remote Terminals.
The PTP software offers full configuration of the UUT tests, print outs of test results and manual or automated execution of each test.
It is currently available for the API1553 (PCI), ACI1553 (CompactPCI), API3910 (PCI), ACI3910 (CompactPCI), AXI1553 (VXI) and AXM1553T (VXI) modules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
